GAS AND OIL FIRED SPACE HEATERS
A WIDE RANGE FOR WIDE SPACES

Available also in LOW NOX version, with modulating burner, in condensing version, with variable air flow rate with very high static pressure

High efficiency cabinet warm air heaters, for direct air throw or air ducting application, working either with light oil or gas burner. Combustion chamber in stainless steel AISI 430, modular elements heat exchanger, centrifugal fans with transmission pulley with variable diameter, electronic control and safety system. Cabinet heater robustly constructed, formed by galvanised pre-coated steel panels, fitted with a radiant sheet insulation.

Construction Characteristics
Cabinet - consists of a steel sheet supporting structure with detachable closing panels internally lined with radiation-proof heat insulation and finely epoxy-painted.
Fan Group - includes one or more centrifugal double intake fans, statically and dynamically balanced, driven through a variable gear transmission by an electric motor complete with belt tightener.
Electric Equipment - for automatic or manual fan control and for the emergency stopping of the burner in case of air overheating. Inclusive of electric switchboard and FAN-LIMIT double thermostat.
THE HEAT EXCHANGER: THE HEART OF THE MACHINE
High efficiency heat exchanger, consisting of:
Combustion Chamber
- made of AISI 430 18% chromium stainless steel, flame-inversion model with low thermal load, cylindrical or ellipsoidal, perfectly cooled in all of its points.
Exchange Elements - with steel plate exhaust flues, flat tubular sections, with swirl impressions for maximum thermal efficiency.
Exhaust Manifold - front and rear steel with wide inspection doors for rational and easy cleaning.

Certified in accordance with:
Gas Directive 90/396/CEE
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

TC-E Series Warm Air Heaters

TCO Series Warm Air Heaters - Space Heaters in Horizontal Version

Available also in LOW NOX version, with modulating burner, in condensing version, with variable air flow rate with very high static pressure

Certified in accordance with:
Gas Directive 90/396/CEE
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

High efficiency cabinet warm air heaters in horizontal version proposed both for external and indoor installations, for direct air throw or air ducting application, working either with light oil or gas burner, for indoor installation with powers between 60 and 769 kW. The stainless steel flame-inversion model combustion chamber, made of AISI 430 with low thermal load, particularly firm and the high efficiency exchange elements make this heater proper to the most arduous applications reducing operating costs to the minimum. Centrifugal fans are driven through a variable gear transmission. Heaters are available in On-Off, two-stages, condensing and high static pressure versions.

Construction Characteristics
Cabinet - consists of a steel sheet supporting structure with detachable closing panels internally lined with radiation-proof heat insulation and finely epoxy-painted.
Fan Group - includes one or more centrifugal double intake fans, statically and dynamically balanced, driven through a variable gear transmission by an electric motor complete with belt tightener.
Electric Equipment - for automatic or manual fan control and for the emergency stopping of the burner in case of air overheating. Inclusive of electric switchboard and FAN-LIMIT double thermostat.
THE HEAT EXCHANGER: THE HEART OF THE MACHINE
High efficiency heat exchanger, consisting of:
Combustion Chamber
- made of AISI 430 18% chromium stainless steel, flame-inversion model with low thermal load, cylindrical or ellipsoidal, perfectly cooled in all of its points.
Exchange Elements - with steel plate exhaust flues, flat tubular sections, with swirl impressions for maximum thermal efficiency.
Exhaust Manifold - front and rear steel with wide inspection doors for rational and easy cleaning.

Applications

Applications

Technical Specifications TC-E Series

Technical Specifications TCO Series

Models TC45E - TC300E are equipped with variable gear transmission. Models TC375E - TC800E with fixed gear transmission. Models TC375E - TC800E are delivered with the base detached from the main body

AGRI Series - The Suspended Agricultural Heaters

Certified in accordance with:
Gas Directive 90/396/CEE
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

Warm air heaters either for direct or tubing air distribution, working with light oil or gas burner stainless steel combustion chamber and heat exchanger completely in stainless steel AISI 430, either with
high performance axial or centrifugal fans, electronic control and safety system, cabinet heater robustly constructed formed by galvanised pre-coated steel panels fitted with a radiant sheet insulation.

The Tecnoclima’s 5 models have been designed for greenhouse heating, agrarian structure or garden, greenhouses and also zootechnical breeding.

A huge range of accessories is available for Tecnoclima AGRI SERIES. Available also in the gas burner version.

Applications

THE SPECIAL STAINLESS STEEL EXCHANGER, THE HEART OF THE MACHINE.
Patented highest efficiency heat exchanger, with air flow completely in counter current to the exhaust flow, made exclusively in 18% chromium stainless steel, which guarantees total protection against corrosion both from humidity and combustion by-products.
The heat exchanger is made up from:
Combustion Chamber - cylindrical flame inversion model, perfectly cooled at every point, with outlet to oil-fired burner and visual control of flame.
Exchange Elements - inclined upwards, with flat tubular section exhaust flues and swirl impressions for maximum thermal efficiency.
Exhaust Manifold - with wide inspection door for easy cleaning of the exchanger and chimney inlet.

The Specific Advantages of the Suspended Version
Obstruction on the ground is avoided
The installation can be permanent - no need to remove the heater at the end of the season
Placement close to the front of the greenhouse allows the inlet of fresh air and the frontal outlet of the chimney, avoiding having to perforate the roof
The heater will not come into contact with the irrigation water
In particular the warm air heaters AGRI-P with axial fan can be installed either vertically or horizontally, to be more suited to the shape of the greenhouse

Technical Specifications Agri Series

TPM Series - Modular Air Handling Units - The Variably Combined Units

Technical Specifications TPM Series

Pairing Table For Tecnoclima TPM Units

Heating Capacity

Cooling Capacity

Air handling units, modular type, casing made of pre-painted galvanised steel panels with thermic and acoustic sheet insulation, interchangeable inspection panels, exchange coil copper tubes with plate type aluminium fins with high exchange surface, high performance, low sound pressure centrifugal fans with variable speed.
The 4 models with the different types of batteries have been designed for little and medium size environments heating, conditioning and air treatment. From a simple to a very sophisticated installation such as 4 tubes system, a split-system or a ventilation system.
A very much complete range of accessories is available for the TPM Series.

Examples of Horizontal and Vertical Modularity

Certified in accordance with:
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

Applications

Heating and aeraulic capacity with 4 ranks battery. Performances at EUROVENT conditions

KUBO Series - Fan Coil Units - A Big Resistant Heart

Certified in accordance with:
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

Mechanical resistance up to 200kg. 5 speed fan motor

Fan coil units either vertical or horizontal model, either floor, wall or ceiling mounted models, galvanised painted casing with anti-condensate material, heat transfer coil made of copper tube with aluminium fins, that can be connected either right or left side, five speed low sound pressure level centrifugal fan, condensate water pan, cleanable air filter, control system.

  1. Vent coil (4)
  2. Coil connections
  3. Fixing holes
  4. Condensate collection tray
  5. Condensate discharge
  6. Fans motor
  7. Filters
  8. Fans
  9. 3 Ranks coil
  10. Electrical connections
  11. Thermostat (optional)
  12. 5 Speed changeover switch

Technical Specifications KUBO Series

Applications

Construction characteristics

UNIX BLOCK Series - Single Block Mini Chiller - Air cooled ultra-packaged water chillers

Cooling performance following EUROVENT conditions

The incorporated hydraulic group is equipped with storage tank, high pressure circulation pump, expansion tank, water-gauge, differential pressure, automatic breather and safety valve. The cooling circuit uses R407C ecological gas.
 

Certified in accordance with:
PED Directive 97/23/CEE
Low Tension Directive 73/23/CEE
Machine Directive 89/392/CEE
Electromagnetic Compatibility Directive 89/336/CEE

R407C Ecological Gas

Air cooled water chillers also in the heat pump version, with incorporated hydraulic group equipped with double storage tank, high pressure circulation pump, expansion tank, water-gauge, differential pressure switch, automatic breather and safety valve.

Control of the fan speed with a pressure transducer (rather than a temperature one). Special multi-blade fans with drag profile, low number of rounds and variable speeds current installed. The local terminal of the microprocessor in sight, high pressure circulation pump current installed. Two inertial storage tanks integrated in the unit current installed.

Construction characteristics

  1. Multi-blade fan with variable speed
  2. High pressure circulation pump
  3. Inertial double storage tank
  4. Check socket and charge expansion tank
  5. SCROLL compressor
  6. Control board with interface microprocessor - complete with keyboard

Applications

Technical Specifications UNIX BLOCK Series

Tecnoclima

Web site design
by Spellbound©

Phone Us
+64 4 939 4334

This site best viewed in
IE 1024x768