DUST EXTRACTION - Compact Extraction/Filtration

The Model SE.4.M is a powerful compact extraction/filtration unit ideally suitable for the collection of dust from the smaller woodworking machines, grinding, linishing etc. Originally designed for use in Technical Colleges, also suitable for the smaller workshop.

Units are supplied with wall brackets for wall mounting, or can be provided with legs for floor standing. The unit is equipped with a high performance fan/motor assembly providing strong at source extraction. The SE.4.M can also be fitted with built-in spark arrester when required.

Units are available for either 220/240 volts single phase 50 cycles or 380/440 volts three phase 50 cycles. SE.4.M

Nominal Air Flow

600m3/hr @ 200mm

Dimensions

580 x 580 x 1250mm H

Weight

64kg

Model SE.4.M

SMOG-EATER MODELS SE.6 & SE.6.M

 

SE.6

SE.6.M

Nominal Air Flow

1000 m3/hr

1000m3/hr

Dimensions

485 x 480 x 860mm  H

485 x 480 x 750mm H

Weight

60kg

58kg

SMOG-EATER MODELS SE.6 & SE.6.M
The Model SE.6 SMOG-EATER is the smallest electrostatic air filter in the Horizon range. The Model SE.6.M is a similar sized unit with mechanical filters. Both units are provided with either brackets for wall mounting or can be provided on legs for floor standing. The SE.6 SMOG-EATER is ideally suited for linking together four/five Mini Rambler extraction arms e.g. solder fume extraction/filtration. The Model SE.6.M is fitted with a cartridge filter. Units are available for either 220/240 volts single phase 50 cycles or 380/440 volts three phase 50 cycles.

Optional pressure gauge available for Model SE.6.M to indicate when the filter requires cleaning/changing.

A central solder fume extraction/filtration system serving various bench mounted Mini-Ramblers can also be extended to include hoods/canopies over flow solder machines etc.

SE.6

SE.6.M

Model SE.6
Dual bench mounted solder extraction

SMOG-EATER MODELS SE10 & SE10M

Models SE.10 and SE.10.M are larger versions of the SE.8.M models. The SE.10 is provided with two sets of industrial electrostatic air filters in tandem for particularly high air cleansing efficiency, the SE.10.M is fitted with graded mechanical filters, the grades selected to suit the application

SE.10 smog eater units

SE.10 welding fume

SE.10 serving 8 solder extraction points

Units can be supplied with brackets for wall mounting, or attaching to suitable steelwork or designed to be suspended from roof steelwork

These units are also suitable for oil mist/oil smoke, welding fume, solder fumes and general dusts.

Units are suitable for attaching to ductwork, hoods, canopies and Horizon SMOG-RAMBLER self supporting flexible dust and fume extraction arm/hood assemblies.

Nominal Air Flow

1700 m3/hr

Dimensions of main cabinet

480 x 480 x 760mm H

Weight

84kg

SMOG-MOBILE

The SMOG-MOBILE is built for rigorous industrial use, captures pollution “at source” - filters and returns the valuable heated air to the workshop. SMOG-MOBILE fume/dust extraction units are easily wheeled to any factory location where fume/dust extraction is needed.

Units are available with electrostatic filtration elements for fume removal e.g. welding fume, oil mist/smoke, and units are available with mechanical filtration elements suitable for dust extraction.

The SMOG-RAMBLER arm/hood assembly, either one or two can be fitted, are completely flexible, self-supporting and easily positioned. 2m, 3m, and 4m lengths are available.

Units can be built for any electrical voltage.

Optional final activated carbon gas/odour filters available for all models.

Units Fitted With Mechanical Filters These units are fitted as standard with an aluminium mesh prefilter, followed by two 50mm thick woven material intermediate filters mounted in tandem, followed by a 450mm deep pleated vee bag filter of the high efficiency, high surface area type and where required followed by a final sub micron HEPA filter.

All filters are fitted on slides and easily removed for cleaning/replacement via hinged access doors.

Nominal Air Flow

1700 m3/hr

Motor Rating

0.75 kW

Overall dimensions

8780 x 770 x 780mm H

Weight

96kg

SM.10.12R

Electrostatic filters

SM.10.23R

Mechanical filter

Flameproof model

PANDA™ Mobile Fume Extraction Unit

The PANDA is designed for ease of mobility and is easily wheeled to any factory location where fume extraction is needed. The articulated arm is self-supporting and quickly positioned at the source of fume emission.

There is a choice of filter cartridge, the standard cartridge has a filtration efficiency of 99.9% with particle sizes ranging from 0.2 to 2.0 microns. The micro filter cartridge has an efficiency of 99.985% at 0.3 microns. The media area of both cartridges is 14.0m2. The unit can be provided with a 2m arm or 3m arm.

There is also a choice of hood shape i.e. standard flared hood, fish-tail hood or high velocity hood. Units are available for any electrical voltage. The motor capacity is 0.75kw. Optional low voltage spotlight for the hood. Optional activated carbon gas filter for odour reduction.

Nominal Air Flow

1700 m3/hr

Dimensions

1040 x 800 x 1560mm H

Weight

90kg

PC.13R240

Model PC.13R240
Panda

Optional High Velocity Hoods

Standard
Cartridge

Micro
Cartridge

Optional Low-voltage Hood Light

HIPPO DUST BOX
Automatic Cleaning Dust Extraction Unit

The HIPPO dust box is a high capacity self cleaning dust extraction unit, and is available in various configurations, namely:-

• Mobile unit
• Floor mounted
• Wall mounted

Fitted with motorised automatic cleaning. Electrically operated -compressed air not required.

Features:
• Self-cleaning air filter. During the cleaning cycle (energised by a switch) the cartridge filter is rotated and dust is dislodged by tensioned pads - dust is collected in a pull out drawer at the base.
• Returns cleaned air to the workshop (except hazardous materials subject to special restrictions).
• Silencers available for low noise level applications.
• Quick release bin for dust storage at the base available in lieu of pull out drawer.
• Designed to work in conjunction with the Horizon SMOG-RAMBLER flexible self supporting dust extraction arms or interconnecting ductwork/hoods and canopies.
• Powerful suction (2000 m3/hr maximum).

Options:
• Can be supplied with 2, 3 or 4m long SMOG-RAMBLER dust extraction arm
• Optional add-on activated carbon gas filter available for odour reduction
• The standard unit includes motorised fully automatic self cleaning. At a lower cost, the unit can be provided with a crank handle for manual rotation.

Air Volume

Up to 2000 m3/hr

Filtration efficiency

99.9% with particle sizes ranging from 0.2 or 2.0 microns

Weight

118kg

Filter Cartridge

High strength spun bonded polyester 20m2 media area

Dimensions

Main casing 1000 x 650 x 1000mm H

Power Supply

Available for any electrical supply

HDB.12R with motorised cleaning

HDB-CR.13R with crank handle for manual rotation/cleaning

Floor standing Hippo with quick release bin

Internal Filter Cartridge

FILTO-BENCH™
The all in one combined workbench with built-in dust and fume extraction at source. The compact design utilises minimum floor space, whilst providing for personnel a sturdy workbench, integral work area light, built in dust and fume extraction, and a choice of bench width, depth and height. Can be constructed to either stand or sit at the FILTO-BENCH when working. There are no installation costs, simply place in the desired location, wire in to the nearest electrical power source, and go to work! The FILTO-BENCH is offered as a static unit or mobile, there is a choice of size, handing, optional attachments e.g. power sockets built-in, turntable. There is also a choice of filters either electrostatic, mechanical, or a combination of both to suit the application.

Advantages include: No exterior exhaust required, no heat loss from your workshop, minimal maintenance, long life, high filtration efficiency at source and built to a high standard, for long vigorous industrial use.

Suitable for grinding, fettling, welding, solvent, adhesive vapours and many other bench operations

• Standard range of sizes
• Built-in extraction/filtration, recirculates clean-air back to the workspace
• Static, or mobile units available
• Available for all electrical supplies
• Anti-spark arrestors included when applicable
• Custom built units available to any size, shape or handing - choice of filters
• Flameproof construction available
• Units available on wheels for mobility
• Down draught principle i.e. dust and fumes pulled away from the operator, complying with COSHH regulations
• The FILTO-BENCH is also available with a duct spigot outlet, for connection to a free standing separate fan, and free standing separate filter assembly with automatic cleaning where required, alternatively, exhaust to atmosphere

There are 3 types of Filto-Bench available

TYPE HD - suitable for heavy industrial applications

TYPE ED - designed for light/medium engineering applications

TYPE CD - intended for laboratory, University type applications
 

Standard Sizes
(nominal)

TYPE HD
1.5m long x 1.0m wide
2.0m long x 1.0m wide
2.5m long x 1.4m wide
Any size built to order

TYPE ED
1.3m long x 0.7m wide
1.3m long x 1.0m wide
1.9m long x 1.0m wide
Any size built to order

TYPE CD
0.7m long x 0.7m wide
1.3m long x 0.7m wide
1.9m long x 1.0m wide
Any size built to order

Grinding work bench

Grinding fettling/bench

Down draught work bench

HD Down draught work bench

CD Down draught work station

Welding bench

Filto-Bench ED down draught work table

FUME EXTRACTION - WET & DRY DUST COMBINATIONS

Oil Mist, Oil Smoke & Grinding Dust Combination Extraction Units
The CE.M series are designed for the extraction/filtration of polluted air streams consisting of a mixture of both dry dusts and oil mist/smoke.

The units are manufactured from heavy gauge steel, continuously rated, and arranged for floor standing, or wall mounted.

• High efficiency backward inclined centrifugal fan assembly
• Built as standard for 380/440 volts three phase 50 cycles. Other electrical voltages available
• There is a choice in position and size of the foul air inlet
• Hinged access doors provide easy withdrawal of the internal filters
• Built-in silencer as standard
• Overall Efficiency - 99.99%

There are four standard sizes as detailed below. Larger units are available built to order.

THE HEAVY DUTY, DRY/WET POLLUTION COLLECTOR

 

CE.10.M

CE.20.M

CE.30.M

CE.40.M

Air Volume

1700 m3/hr

3400 m3/hr

5100 m3/hr

6800 m3/hr

Filter

Graded Mechanical Filters - specification can vary to suit the application

Dimensions

600 x 700mm

1200 x 700mm

1800 x 700mm

2400 x 700mm

Height Dimension

2400mm

2400mm

2400mm

2400mm

Motor

2.2kW

3.0kW

4.0kW

5.5kW

Main Cabinet

Zintec, finish painted

SMOG-RAMBLER - THE SENSIBLE WAY TO REMOVE DUST/FUMES AT SOURCE

SMOG-RAMBLER - STANDARD - Self-supporting, Flexible Dust/Fume Extraction Arm

Optional low voltage light hood        Fish-tail hood

Designed for at source extraction of dust and fumes. The SMOG-RAMBLER is 150mm diameter and is available with a radius of 2, 3 or 4m. The unit operates throughout a 360 degree circle, and incorporates a “stay-put” feature enabling the extract hood to be positively located at the source of dust/fume emission.

The securing flange, once bolted in position, forms the only support required.

Units available for hanging or standing configuration.

The HEAT-RAD range of gas fired tubular radiant heating systems were designed and introduced into the market place by Horizon during 1983. The range of units available can be arranged in different configurations, namely U-tube style, straight tube style, semi-integrated or fully-integrated systems totally flued to atmosphere.

Capacities are as detailed below:
HR.45 13 kW (45,000 BTUs/hr)
HR.45.FD 13 kW (45,000 BTUs/hr)
HR.75 22 kW (75,000 BTUs/hr)
HR.75.FD 22 kW (75,000 BTUs/hr)
HR.130 38 kW (130,000 BTUs/hr)
HR.130.FD 38 kW (130,000 BTUs/hr
)

HEAT-RAD RADIANT HEATING

What is Radiant Heat
Radiated heat is similar to light, it does not warm the air through which it passes but directly heats objects such as men or machines. Like light, radiated heat can be reflected to concentrate the heat where it is needed i.e. at the working level.

How Does it Work
HEAT-RAD provides warmth via radiated heat, assisted by the polished reflectors forming an integral part of the units. Unlike other systems e.g. warm air systems, HEAT-RAD does not waste fuel by heating the roof space before the benefit reaches the shop floor. HEAT-RAD does not create convection but warms walls, floors and machinery to form a heat reservoir. This means that the system is switched on only a short time before work begins, with no wasted energy by the system having to warm the building prior to occupation.

What is HEAT-RAD
HEAT-RAD is a highly efficient gas-fired tubular heating unit. An automatically controlled burner unit is connected into one end of a wide bore steel tube, at the other end a suction fan ensures that after ignition hot gases and air are drawn through the tube which gets hot and radiates heat to the area below.

Why Choose HEAT-RAD
HEAT-RAD is manufactured in Bristol by Horizon, and is backed by a team of engineers to advise on technical surveys, sales and after sales service.

The HEAT-RAD radiant heating system provides a fast and controllable heat, they occupy no floor space and provide for substantial fuel savings over other systems, by avoiding long warm-up periods or round-the- clock heating. They can also be used to heat occasional work areas bringing them up to adequate comfort levels without the need for permanent background heating.

HEAT-RAD radiant heating systems have been tested and examined by British Gas and found to comply with the essential requirements detailed in Annexe 1 of the European Gas Supplier's Directive (90/396/EEC), Certificate No. BG/EC-87/96/212. The manufacture of HEAT-RAD units is monitored by British Gas, Certificate of Registration No. ECS-00134 and Horizon International are authorised to place the CE mark and the British Gas Notified Body identification symbol (0087) on HEAT-RAD products.

HEAT-RAD™ Industrial Heating - Approximate Sizing Guide

Model

Rating

Area Served

HR.45/HR.45.FD

13kW (45,000 BTUs/hr)

37 - 65 Sq.m (400- 700 Sq.ft) when mounted at 3.0 - 4.5m (10'0" - 14'6")

HR.75/HR.75.FD

22kW (75,000 BTUs/hr)

70 - 102 Sq.m (700 - 1100 Sq.ft) when mounted at 3.6m - 6.0m (12'0" - 19'6")

HR.130/HR.130.FD

38kW (130,000 BTUs/hr)

102 - 186 Sq.m (1100 - 2000 Sq.ft) when mounted at 4.25m - 15.0m (14'0" - 50'0")

Minimum volume to be heated by each HEAT-RAD heater must be at least:

Model HR.45 / HR.45.FD

130 m3 (4440 ft)

Model HR.75 / HR.75.FD

220 m3 (7500 ft)

Model HR.130 / HR.130.FD

380 m3 (13418 ft)

Size of permanent air vent direct to outside

Model HR.45 / HR.45.FD

95 cm2 plus 35 cm2 per extra 2Kw or part thereof in excess of 6Kw rated heat input

Model HR.75 / HR.75.FD

95 cm2 plus 35 cm2 per extra 2Kw or part thereof in excess of 6Kw rated heat input

Model HR.130 / HR.130.FD

95 cm2 plus 35 cm2 per extra 2Kw or part thereof in excess of 6Kw rated heat input

Typical permanent vent air requirements

 

One Heater

Two Heaters

Three Heaters

Model HR.45 / HR.45.FD

235cm2 (35in2)

445cm2 (65in2)

690cm2 (102in2)

Model HR.75 / HR.75.FD

375cm2 (55in2)

750cm2 (110in2)

1125cm2 (165in2)

Model HR.130 / HR.130.FD

655cm2 (102in2)

1320cm2 (205in2)

1985cm2 (308in2)

Factories

HEAT-RAD HEATERS APPLICATIONS/INSTALLATIONS

Aircraft Hangars

Indoor Halls

Plant Nurseries

Garden Centres

Warehouses

Indoor Stadiums

Garages

Horizon manufacture a wide range of radiant heating controls and control panels.

HEAT-RAD™ Radiant Heating Control Thermostats
The MAX-ECON radiant heating control unit comprises two parts namely the black bulb sensor and the black bulb radiant thermostat.

The Horizon MAX-ECON black bulb electronic controls, provide extremely accurate comfort control by continuous monitoring of air velocity, mean radiant temperature, and air temperature, resulting in maximum energy conservation. They have the following advantages:

• The black bulb radiant thermostat can be mounted anywhere convenient e.g. Manager's office, plant room etc. Only the sensor requires to be located in the heated space, and has no adjustment, preventing unauthorised interference.
• True comfort conditions depend on the space air velocity, mean radiant temperature, and air temperature. The Horizon MAX-ECON control equipment takes into account all three.
Night set-back facility. Incorporated as standard to provide a reduced temperature for night operation controlled by optional time clock.
• No maintenance. Sensor can be mounted up to 250 metres from thermostat unit.

HEAT-RAD™ Control Panels
Four standard sizes of zone control panels are manufactured, single zone through to four zone. Larger units are built to order.

Each panel comprises mains on indicating light, heater run indicating lights, mode switch, digital time clock and the requisite number of MAX-ECON black bulb temperature controllers with night set back facility.

Larger control panels built to order incorporate all the above mentioned features as standard with additional controls for either Octopus integrated exhaust flue systems or flue dilution plant.

 

Black Bulb sensor and radiant thermostat

Multi Heat-Rad installation control panel

Zone control panel

FD Models
Units can be provided with FD Burner Boxes, which are designed to accept a ducted supply of fresh air to the burner box, rather than take air for combustion from the heated space.

‘Octopus System’
Available for models HR45 and HR75
The ‘Octopus’ system is a number of either ‘U’ tube units or straight tube units, collectively flued to the outside. Suitable for buildings where total flueing is required. Up to a maximum of 10 heaters per system.

For full dimensions of any model contact Devham for applicable data sheets.

U-TUBE UNITS

 

Model HR.45

Model HR.75

Model HR.130

 

45,000 Btu/hr ((13kW)

75,000 Btu/hr ((22kW)

130,000 Btu/hr ((38kW)

Overall length

3525

5230

5900

Width

425

480

680

Weight

55kg

90kg

100kg

STRAIGHT-TUBE UNITS

 

Model HR.45.s

Model HR.75.s

Model HR.130.s

 

45,000 Btu/hr (13kW)

75,000 Btu/hr ((22kW)

130,000 Btu/hr ((38kW)

Overall length

6320

8290

10,940

Width

220

290

480

Weight

55kg

90kg

100kg

HEAT-SAVER WINTER HEAT ECONOMISER

Lower Temperature Gradients (Lower heat loss through roof)
Most forms of heating maintain a considerable temperature gradient between working level and roof level - Heat-Saver units are designed to substantially overcome this gradient and maintain a low temperature differential.
No Maintenance
Once installed, the units require no maintenance and the power consumption of the units themselves is insignificant.
Fully automatic Control
This is available to allow the units to come into operation as soon as useful heating is available, without waiting for excess temperature.
Summer Ventilation
During hot periods the Heat-Saver may be used as a ventilator, to guarantee a certain movement of air and therefore providing a sense of freshness.
How many units required
Calculate the volume of unused roof space (buildings with flat roofs, allow 600mm height). Multiply by 5, divide by 60, divide by 2000 - this gives you the number of Heat-Savers required. We recommend however contact with Devham Services technical department for further advice as other factors often affect the correct selection, e.g. type of factory heating installed.

FAN UNIT

Double inlet forward curved centrifugal. Speed 900 rpm, for exceptionally low noise level

MOTOR

180 watts, 220/240 volts - 1 phase - 50 cycles. Bearings lubricated and sealed for life

AIR VOLUME

3400 M3/hr

WEIGHT

32 Kg

LENGTH OF THROW

Adjustable between 4.6m - 18.3m

MAIN CASING

18 gauge zintec coated steel sheet, primed and finished painted

DIMENSIONS

500 x 480 x 530mm high

AIR INLET

Combination Air Inlet Grille/ Protection Guard fitted

OUTLET GRILLE

Four way, fully adjustable warm air outlet grille

CONTROL

On/off adjustable thermostat mounted on unit casing

ADVANTAGES

TECHNICAL DATA

Saves money by redirecting warmed air from roof to floor - AUTOMATICALLY

.
 

Horizon

Web site design
by Spellbound©

Phone Us
+64 4 939 4334

This site best viewed in
IE 1024x768