The FARAL Lineal 80 radiator is a heating emitter manufactured in die-cast aluminium and consists of individual modular sections assembled by means of steel nipples and special sealing gaskets. It is intended for use in closed circuit central or individual hot water heating systems.

The FARAL Lineal 80 radiator is manufactured by FARAL S.p.A., whose name has been closely associated with vanguard technology in the field of domestic heating systems for more than 30 years.

PRODUCTION
The raw materials used for the manufacturing of FARAL Lineal 80 radiators are aluminium alloys, specifically developed to enable complex items to be produced. The radiators undergo specific multi-phase treatments before the final coating, making the external and internal surfaces highly resistant to the corrosive action of the water in the system and the surrounding environment. The painting which follows is carried out through a double coating and stoving process. The first coating is created through an anaphoretic immersion of the radiators while the second uses an epoxy resin powder-based finish. Polymerisation in high-temperature kilns guarantees long lasting and glossy coats. The FARAL Lineal 80 radiators undergo to the strictest technological and aesthetic controls before the final leakage test to ensure they comply with the EN 442-1 standard.

ALUMINIUM AND THERMAL CHARACTERISTICS
Aluminium is an excellent heat conductor and this ability has been optimised since the early stages of the designing of FARAL Lineal 80 radiators to guarantee comfort in any environment. Aluminium with its high conductivity reacts swiftly to changes in the temperature of the fluid circulating inside it and its low thermal inertia allows it to respond instantly to thermostatically controlled systems. This ability, combined with a low water content, constitutes a substantial saving of energy.

LIGHT WEIGHT AND EASY TO INSTALL RADIATORS AND ACCESSORIES
Thanks to light weight and easy handling, any installation of FARAL Lineal 80 radiators constitutes a substantial saving of time. FARAL Lineal 80 radiators are supplied in pre-assembled sets, containing from 2 to 15 elements, depending on the customer's requirements. Its wide range of accessories makes the installation of the FARAL Lineal 80 simple and cost effective. Additional sections can be easily added if more are required.

THE PACKING
To protect the radiator during handling before its installation, FARAL Lineal 80 is wrapped in a thick layer of shrink-wrapping polyethylene and then placed in a strong cardboard box. This way the radiator is guaranteed to be transported safely and easily.

THE COLOURS
The standard colour is the pure white RAL 9010 accomplished through anaphoretic immersion and deposition of powder-based pigments polymerised in high-temperature kilns. In addition to the standard colour, FARAL Lineal 80 can be supplied in a selected range of colours, taken from the entire RAL collection.

 

Aluminium Radiator - Faral Lineal 80

Model
 

Depth
A

mm

Height
B

mm

Centres
C

mm

Length
D

mm

Connection
-

inches

Water Content

I/sect.

Weight


kg/sect.

Heat output
EN 442
T=50K
W/sec
t.

Exponent
 

n

FARAL Lineal 80 800

80

880

800

80

1

0,470

2,040

164

1,352

FARAL Lineal 80 700

80

780

700

80

1

0,420

1,840

149

1,356

FARAL Lineal 80 600

80

680

600

80

1

0,380

1,640

133

1,332

FARAL Lineal 80 500

80

580

500

80

1

0,320

1,440

118

1,337

FARAL Lineal 80 350

80

430

350

80

1

0,260

1,050

88,8

1,302

The maximum operating pressure is 1000 KPa (10 bar)
The above thermal outputs expressed at T=50K comply with the European regulation EN-442-2.
The dimensions are subject to normal manufacturing tolerances, according to the regulation EN-442-1.
The guarantee is valid for ten years provided that the specific conditions of use laid out in the Faral technical literature are adhered to.

 

In home example of the Faral Lineal 80

 

Faral

Web site design
by Spellbound©

Phone Us
+64 4 939 4334

This site best viewed in
IE 1024x768